>>
斗式提升機技術
>> 斗式提升機的技術定義與其工作原理
斗式提升機 bucket elevator
斗式提升機利用均勻固接于無端牽引構件上的一系列料斗，豎向提升物料的連續輸送機械。
斗式提升機分為鏈條式提升機和皮帶式提升機兩種形式。
斗式提升機具有輸送量大，提升高度高，運行平穩可靠，壽命長顯著優點，其主要性能及參數符合JB3926----85《垂直斗式提升機》（該標準等效參照了國際標準和國外先進標準），牽引圓環鏈符合MT36----80《礦用高強度圓環鏈》,本提升機適于輸送粉狀，粒狀及小塊狀的無磨琢性及磨琢性小的物料，如：煤、水泥、石塊、砂、粘土、礦石等，由于提升機的牽引機構是環行鏈條，因此允許輸送溫度較高的材料(物料溫度不超過250
℃)。一般輸送高度*高可達40米.
斗式提升機用來垂直提升經過破碎機的石灰石、煤、石膏、熟料、干粘土等塊粒狀物料以及生料、水泥、煤粉等粉狀物料。根據料斗運行速度的快慢不同，斗式提升機可分為：離心式卸料、重力式卸料和混合式卸料等三種形式。離心式卸料的斗速較快，適用于輸送粉狀、粒狀、小塊狀等磨琢性小的物料；重力式卸料的斗速較慢，適用于輸送塊狀的，比重較大的，磨琢性大的物料，如石灰石、熟料等。斗式提升機的牽引構件有環鏈、板鏈和膠帶等幾種。環鏈的結構和制造比較簡單，與料斗的連接也很牢固，輸送磨琢性大的物料時，鏈條的磨損較小，但其自重較大。板鏈結構比較牢固，自重較輕，適用于提升量大的提升機，但鉸接接頭易被磨損，膠帶的結構比較簡單，但不適宜輸送磨琢性大的物料，普通膠帶物料溫度不超過60°C，夾鋼繩膠帶允許物料溫度達80°C，耐熱膠帶允許物料溫度達120°C，環鏈、板鏈輸送物料的溫度可達250°C。
另我公司提升機技術部可根據用戶需要而設計制造特殊型號規格的提升機。
bucket elevator
Bucket elevator fixed by uniform traction in
unprovoked hopper a series of components,
materials to enhance the continuous vertical
conveyor.
Bucket elevator into the chain and belt elevator
elevator two forms.
Bucket elevator with throughput, and enhance the
high degree of high, stable and reliable
operation, long life and significant advantages,
its main properties and parameters in line with
JB3926 ---- 85 "vertical bucket elevator" (a
reference to the standard equivalent to
international standards and foreign advanced
standards), in line with the traction ring chain
MT36 ---- 80 "high-intensity ring mining chain",
the hoist is suitable for conveying powder,
granular and non-small-block mill Zhuo Zhuo and
grinding of small materials, such as: coal,
cement, stones, sand, clay, ore and so on, as a
result of the traction elevator is circular
chain, thus allowing for delivery of materials
at high temperature (material temperature does
not exceed 250 ℃). General transport up to 40
meters high.
Bucket elevator for vertical lifting through the
limestone crusher, coal, gypsum, clinker, clay
and other dry granular material, as well as
pieces of raw material, cement, coal powder and
other materials. Under the hopper to run
different speed, bucket elevator can be divided
into: Centrifugal discharge, discharge and
gravity, such as hybrid of three forms of
discharge. Centrifugal fast discharge speed of
the bucket for conveying powder, granular, small
block, such as grinding material cut small;
gravity discharge of the slow speed bucket for
bulk transport, and the proportion of larger ,
mill cut large materials, such as limestone,
clinker and so on. Bucket elevator components
have the traction chain, such as boards of
several chains and tape. Chain structure and
manufacture of relatively simple, and the hopper
is also very strong connection, transmission of
large mill cut materials, wear a smaller chain,
but its larger self. Chain structure of a solid
plate, lighter weight, applied to enhance the
capacity of the hoist, but the hinged joints
susceptible to wear, tape is relatively simple
structure, but not suitable for delivery of a
large mill cut materials, plastic materials, the
general temperature of not more than 60 ° C,
steel belt clip allows materials up to a
temperature of 80 ° C, heat-resistant plastic
material to allow up to a temperature of 120 °
C, chain, plate chain conveyor material
temperature of 250 ° C.
銷售熱線： 